Grundfos

Since 1945, water has been the heart and soul of Grundfos. Grundfos is the world’s largest manufacturer and full range supplier of pumps and pump solutions. As a renowned pump manufacturer, Grundfos delivers efficient, reliable, and sustainable solutions all over the globe. Headquartered in Denmark, Grundfos produces over 16 million pumps per year, including:

• Circulator Pumps: Grundfos circulator pumps are designed for best-in-class efficiency with low maintenance. Compared to conventional circulators, they cut energy consumption by up to 80 %, while delivering noise-free performance. Grundfos has the right circulator pump for your heating, cooling and hot water recirculation needs.

• End-Suction Close-Coupled Multi-Stage Pumps: In an end-suction close-coupled multi-stage pump, the liquid runs directly into the impeller and the inlet and outlet form a 90-degree angle to each other. The pumps typically produce high pressure relative to flow, making them ideal multi-purpose pumps for both industry and water boosting in general.

• Wastewater Pumps: Grundfos wastewater pumps combine operational reliability with high total efficiency and offer you the lowest cost of ownership. Many of these pumps are designed for submerged and dry installation to handle the most demanding applications and are tested to the highest standards. These pumps are built for municipal, industrial and domestic wastewater, drainage and surface water, and process water.

• Submersible Groundwater Pumps: Grundfos submersible pumps represent advanced hydraulic design and offer high efficiency, high resistance to sand and other abrasives, motor burnout protection and easy maintenance. Made entirely of corrosion-resistant stainless steel, Grundfos submersible pumps are ideal for applications including groundwater supply, irrigation, groundwater lowering and pressure boosting.

• In-line Single-Stage Pumps: In-line single-stage pumps are typically used in commercial buildings for air-conditioning and heating applications. The pumps are equipped with standard motors and mechanical shaft seals. They are close-coupled, meaning that the pump and motor are two separate units, making them less sensitive to impurities in the pumped liquid.

• In-line Multi-Stage Pumps: In-line multi-stage pumps are used in installations in which a high head is needed. Several impeller stages are connected in series and the inlet and outlet are on the same level. In-line multi-stage pumps are used for water supply, water treatment, and almost any industrial solution including those for aggressive liquids.

• Booster Sets: Grundfos offers booster sets for hospitals, high-rise apartment blocks, irrigation systems and other purposes where there is a need for constant pressure to meet varying demand on the water supply.

Grundfos USA - shaping the future of water solutions in America.

Grundfos ALPHA HWR 15-55 SF/T

Grundfos CR 155, CR 95, CR 125

Warranty

Training

SCALA2 - SMART Pressure Booster Engineered for Efficiency & Comfort!

Experience the perfect blend of performance and efficiency with SCALA2, the smart pressure booster designed for modern homes. In this 35-second film, cricket legend Rahul Dravid shows how SCALA2 delivers consistent water pressure while helping you save on electricity bills.

Whether you're building your dream home or upgrading your current one, SCALA2 is the smart choice for modern living.

Why SCALA2 is ideal for your home?

– Consistent water pressure across all taps

– Energy-efficient performance that lowers your electricity bills

– Whisper-quiet operation

– Perfect for new constructions and home renovations

Water That Connects Us: Grundfos in Action Across the U.S.

From city streets to country roads, Grundfos water solutions are making a meaningful impact across the United States. This film highlights their deep commitment to communities nationwide where every project, partnership, and innovation reflects their mission to deliver water with purpose. It’s a story of how local relevance and national reach come together to support progress and innovation throughout the U.S.

Introducing the New Grundfos TPE3

Buildings consume up to 50% more energy than needed. It’s time for intelligent pump solutions that raise the standard in efficiency and sustainability.

The new Grundfos TPE3 (up to 22 kW) is designed for performance, simplicity, and integration. Featuring the most efficient hydraulics and IE5 motor available, it can increase energy efficiency by up to 50%, automatically adjusting to real-time demand.

With a streamlined range reduced from 25 to 12 models, seamless integration with any building management system, and fast setup via the Grundfos GO app, the TPE3 makes system optimization smarter and easier.

It’s not just intelligence that improves—it's intelligence that elevates. Take your system a step closer to net zero.

Smart Efficiency with MAGNA Pumps

Energy use in buildings is rising—but smarter solutions can change that. The Grundfos MAGNA range of intelligent circulator pumps is designed to reduce energy consumption, cut carbon emissions, and improve system performance across HVAC and water circulation applications.

Built with high-efficiency motors and advanced control features, MAGNA pumps automatically adapt to system demand in real time, helping building owners and operators optimize performance without compromising comfort.

Whether you're upgrading existing systems or designing for the future, MAGNA pumps make it easier to achieve energy savings and reach your sustainability goals.

Get Instant Hot Water with Grundfos ALPHA HWR & ALPHA Comfort System ECM Pumps

In this video, Ty from Grundfos joins Steve, the regional training manager, to explore the advantages of the latest Grundfos hot water recirculation products. They discuss the evolution from traditional circulators like the UPS 15-55, known for their reliable asynchronous motor technology, to new, innovative options that use ECM motors. These new products, including the ALPHA HWR and ALPHA Comfort System, offer quieter and more energy-efficient solutions. With the upcoming DOE Mandate requiring manufacturers to convert to ECM technology, these products are the perfect solution for hot water recirculation applications.

Today, most new homes are constructed with a dedicated return line for efficient circulation, while older homes require a bypass valve to redirect cooled water for reheating. A Grundfos hot water recirculation pump offers an easy-to-install, energy-efficient pump solution for both plumbing situations. The Grundfos ALPHA ensures reliable operation, and immediate access to hot water, minimizing energy and water consumption. Choose Grundfos ALPHA HWR for homes with a dedicated return line or Grundfos ALPHA COMFORT SYSTEM for homes without a dedicated return line.

Meet Joe the Installer

Joe the installer knows his way to the homeowners’ rescue: See how Joe saves The Johnsons from the ice-cold home, and how he spots several places where a Grundfos pump installations could improve the comfort for the Johnson family. This includes boosting, wastewater removal and drainage. On top of that, the Grundfos GO app helps Joe the installer with replacement.

Millions of Customizations Offered by the New Generation of Grundfos CR Pumps

In addition to offering superior hydraulics, world-class and bulletproof reliability, the new generation of Grundfos CR pumps continues to offer a wide array options to customize the pump for your unique application. Our modular approach allows you to customize the material of construction, motor, flanges, mounting configuration and much more.